-
FP Flameproof Rod-Type Immersion Heaters
The FP range of flameproof rod-type immersion heaters is a highly adaptable solution that can be customised to suit the process requirements of our clients, and are suitable for heating all types of process mediums which are non-corrosive to the materials of construction, and carry multiple approvals for global supply.
The FP rod-type immersion heater range is certified for use in hazardous areas where the atmosphere is classified as a Zone 1 or 2 (IIA, IIB, IIC) gas group, or a Zone 21 or 22 (IIIA, IIIB, IIIC) dust group.
-
FP-C Flameproof Removable Core Immersion Heaters
The FP-C range of flameproof removable single and multi-core heaters offer hazardous area heating solutions for oil and similar applications where low heat density is required. Designed for convenience, the elements can be withdrawn for inspection without system drain down. A standard heater consists of a single element (or multiple cores) fitted into a mounting flange. A robust Ex d terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required.
-
FP-C Standard Flameproof Removable Core Immersion Heaters
The FP-C range of standard-design flameproof removable single and multi-core heaters offer hazardous area heating
solutions for oil and similar applications where low heat density is required. Designed for convenience, the elements can
be withdrawn for inspection without system drain down. A standard heater consists of a single element (or multiple cores)
fitted into a mounting flange. A robust Ex d terminal enclosure protects the electrical connections. The watts density of the
element core fitted depends upon the media to be heated and the kilowatt rating required. -
FP-CA Flameproof Removable Cartridge Immersion Heaters
The range of FP-CA flameproof removable cartridge heaters offers a hazardous area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single element or multiple cartridges fitted into a mounting flange. A robust Ex d terminal enclosure protects the electrical connections. The watts density of the element fitted depends upon the media to be heated and the kilowatt rating required.
-
MTH Flameproof Mini Tank Immersion Heaters
The MTH range of heaters is a smaller range of immersion heaters that provide an ideal solution when space is at a premium. Each is designed with specific fittings for direct immersion, and is fully certified for use in hazardous areas where the atmosphere is classified as a Zone 1 or 2 (IIA, IIB, IIC) gas group, or a Zone 21 or 22 (IIIA, IIIB, IIIC) dust group.
-
RFA Flameproof Rod-Type Immersion Heaters
The RFA range of flameproof rod-type immersion heaters is suitable for installation in process tanks, safety showers, engine sumps, pressure vessels and similar plants located in Zone 1 and Zone 2 hazardous areas, where the flammable atmosphere is a IIA, IIB or IIC Gas Group. They are suitable for heating all process liquids or gases which are non-corrosive to the materials of construction.
-
RFA-C Core Flameproof Immersion Heaters
The RFA-C range of flameproof core removable cartridge heaters offers a hazardous area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single element core fitted into a mounting flange. A robust flameproof terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required.
-
RFA-CA Flameproof Cartridge Immersion Heaters
The RFA-CA range of flameproof removable cartridge heaters offers a hazardous area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single or multiple cartridge elements fitted into a mounting flange. A robust flameproof terminal enclosure protects the electrical connections. The watts density of the element cartridge fitted depends upon the medium to be heated and the kilowatt rating required.
