-
EXENC-L LED linear lighting fixtures
EXENC-L series lighting fixtures with LED strips can be installed in hazardous industrial plant units designated as Zone 2 and Zone 21-22. A careful research of the materials and the choice of the most performing electrical components give to EXENC-L, in addition to a considerable duration, greater safety in all environments where a high protection against corrosion, dust, water and humidity is required.
-
FLF-L, FLFE-L LED linear lighting fixtures
FLFE-…L (Ex de) and FLF-…L (Ex d) series lighting fixtures for LED tubes have two low copper content aluminium heads fitted with G13 lamp holder, a tempered borosilicate glass body that is resistant to changes in heat and a
white painted aluminium reflector. The ‘Ex de’ lighting fixture features an “Ex e” terminal board housing that allows entry to the lamp with a cable gland with an “Ex” seal (normal) as specified in installation standard (EN/IEC 60079.14). The entry to the ‘Ex d’ lighting fixtures must be through an Ex “barrier” cable gland (sealed) or, in the case of a conduit system, with an EYS, EZS series sealing fittings. -
FLOWEX High Bay LED lighting fixtures
e FlowEx explosion-proof LED lighting fixtures combine the constant lighting power of 151 l / W real with extreme lightness, ease of installation and versatility for any type of certified environment. The FlowEx series consists of three lamp body sizes and represents the LED alternative for all those areas where it was customary to install low and medium power discharge lamps up to 400W.
The finned body, patented with Heat Destroyer technology, is made of high-quality die-cast aluminum and acts as an excellent heat sink for the circular crown-shaped LED plate. The central heat sink element allows the fresh outside air to disperse the heat by lapping the surfaces in an ascending movement of air that takes advantage of natural convection. -
LFED Emergency lighting fixtures
The explosion proof LFED series emergency lighting fixtures are designed for lighting and identifying emergency exits or escape routes in the event of danger. The emergency versions are fitted with a high-brightness LED indicator light that monitors battery operation and notifies the user in the event of a fault. It switches on automatically if there is a power failure and lasts between 3 and 5 hours depending on the capacity of the chosen batteries. The red LED switches off to indicate that the batteries need replacing either because of a fault in the emergency circuit or because they are flat.
-
LFEE Emergency lighting fixtures
The increased safety LFEE series emergency lighting fixtures are designed for lighting and identifying emergency exits or escape routes in the event of danger.
The emergency versions are fitted with a high-brightness LED indicator light that monitors battery operation and notifies the user in the event of a fault. It switches on automatically if there is a power failure and runs for up to 6 hours. The red LED switches off to indicate that the batteries need replacing either because of a fault in the emergency circuit or because they are flat. -
LIFEX-M LED linear lighting fixtures – aluminium
LifEx-M series lighting fixtures are the first native LED linear product with an innovative design developed by Cortem Group listening to and interpreting the needs of its customers. A careful product architecture oriented to the optimal management of the total life cycle (circular economy) and to the maximization of the useful life has allowed to obtain a lighting fixture of reduced dimensions, light and easy to install, but robust and long-lasting at the same time.
-
LIFEX-P LED linear lighting fixtures
The LifEx-P series lighting fixtures are characterised by an impact- (IK09) and UV-resistant fibreglass reinforced anti-static polyester resin and polycarbonate with a transparent part for light transmission. Versions with emergency operation can be accessorized with battery boxes to facilitate maintenance and/or battery replacement, or with special batteries for applications with ambient temperatures down to -60° C.
-
RLFE Lighting fixtures for discharge lamps up to 400 W
RLFE series lighting fixtures for discharge lamps are ideal for lighting large areas specifically in the chemical, on and off shore petrochemical industries. The body of the lighting fixture is made from low copper content aluminium alloy, the globe is made of borosilicate glass and has excellent thermal and mechanical properties as well as being able to withstand shocks of up to 4 Joules. For this reason, the fixture can also be installed without a protective guard as specified in the relevant standards. In the RLFE series, the lamp and lamp holder are separated by a “chamber” housing the ballast and igniter that in turn are separated by a “Ex e” terminal box that is used to connect the lighting fixture to the power supply through a cable gland with an Ex (non barrier) seal as specified in EN/IEC 60079-14.
-
SLED LED Floodlights ATEX Zone 1
SLED series floodlights with LED technology combine lightweight, compact design, high performance in terms of reliability, safety, efficiency and energy saving. The SLED-250, 400 and 600 models are characterized by LEDs with optics “square shaped beam” that permits a light distribution and a perfectly uniform lighting in every direction.
On the other hand, the SLED 401, 601 and 1000 have no reflector optics and are characterized by a diffused light beam and greater Lumen Output.
