Radio Modem Zone 1/21
The Solexy Ethernet radiomodems are supplied complete with RS485 interface and Ethernet port plus optoisolated input and relay output installed in our explosion proof housing SWA and SWS series that allows a serial data transmission also in classified area Ex.
The SWA and SWS anclosure thanks to its rugged construction combined to Atex and IECEx certificate achieves to have an Modbus RTU data transmission in classified area Ex.
SPECIFICATIONS
Click to expand/collapse
Data Transmission | Serial transmission on RS485 or Ethernet port transparent to the user plus optoisolated input and realy output may used for alarms and/or actuation |
---|---|
Wide Range | Mirror (point to point), Modbus RTU over TCP, Modbus multi master and standard Radiomodem option completely transparent to the user also in case of complex route |
Modbus RTU Over TCP | Suitable for use as a Modbus RTU over TCP Server |
Low Power | Low power consumption in both RX and TX mode with selectable power saving mode by software and on/off switching controlled via DTR criteria |
Adaptiv Frequency Agility |
Adaptive Frequency Agility on 2 or 3 channels8 |
Web Server and Radio Network Status |
Thanks to the web server integrated it is possible to configure the device and check the Radio Network Status through a dedicated utilities |
Encryption Transmission Data |
Secure transmission data thanks to AES (Advanced Encryption Standard) at 128 bit |
Stainless steel mounting kit
APPROVALS
Mounting kit | No Mounting Kit, Pole Mounting Kit, Wall Mounting kit |
---|