Shop

Radio Modem Zone 1/21

These products were developed as a licence free device.
Solexy radiomodems are supplied complete with a RS232 / RS485 interface, optoisolated input and relay output installed in our explosion proof housing SWA and SWS series that allows a serial data transmission in classified area Ex.
Solexy radiomodems are fully transparent to the user and configurable from the PC by means of a dedicated software for the desired functions.

SPECIFICATIONS

Click to expand/collapse
Low Power Low power consumption in both RX and TX mode with selectable power saving mode by software and on/off switching controlled via DTR criteria
Store And Forward Store & Forward mode with 1024 byte maximum buffer size
Adaptive Frequency Adaptive Frequency Agility on 2 or 3 channels
Software Configuration Complete configuration by means of a PC through dedicated software

Advanced Protocol

Point to point, Point to Multipoint, Broadcasting mode or Adresses management, Adresses stored in configuration or from DTE, Digipeater mode, Remote configuration through radio network, Adresses reversing for the answer, Echo function

Transparent Serial

Transmission

Serial transmission RS232 or RS485 transparent to the user plus opto isolated input and relay output may be used for alarms and/or actuation

Stainless steel mounting kit

APPROVALS

csm_LOG_ZUL_ATEX__SALL__AIN__V1_5c46efd86d
ATEX (Europe) approved
Zone 1, 2, 21 & 22 I M2(M1) Ex db mb [ia Ma] I Mb (SWS only)
II 2(1) G Ex db mb [ia Ga] IIC T6...T5 Gb
II 2(1) D Ex mb tb [ia Da] IIIC T80°C...T100°C Db
csm_LOG_ZUL_IECEx-Zulassung__SALL__AIN__V1_d87ccdfa51
IECEx (International) approved
Zone 1, 2, 21 & 22 I M2(M1) Ex db mb [ia Ma] I Mb (SWS only)
II 2(1) G Ex db mb [ia Ga] IIC T6...T5 Gb
II 2(1) D Ex mb tb [ia Da] IIIC T80°C...T100°C Db
Mounting kit

No Mounting Kit, Pole Mounting Kit, Wall Mounting kit

VHF & UHF Radio Modem ATEX Zone 1
This website uses cookies to improve your experience. By using this website you agree to our Privacy Policy.
Read more