-
EV Lighting fixtures for traditional and LED lamps
EV series lighting fixtures for traditional and LED lamps combine beauty and functionality along with high performance and simplicity in complete compliance with the technological requirements of the “Ex sector”. Mechanical features of EV series make these lighting fixtures ideal for use in environments with corrosive atmospheric agents, salts and industrial pollution and guarantee a long working life with little maintenance.
-
EVE Lighting fixtures for traditional and LED lamps
EVE series lighting fixtures for traditional and LED lamps combine beauty and functionality along with high performance and simplicity in complete compliance with the technological requirements of the “Ex sector”. Mechanical features of EVE series make these lighting fixtures ideal for use in environments with corrosive atmospheric agents, salts and industrial pollution and guarantee a long working life with little maintenance. The electrical connection is performed through a terminal board installed in a “Ex e” enclosure, which allows the entry with a cable gland with a sealing “Ex” ring (no barrier), as indicated by the installation on plant Standard (EN/IEC 60079-14).
-
EVL High Bay LED Lighting Fixture ATEX Zone 1
EVL series explosion-proof lighting fixtures features a multi LED board plate which allows a better control of heat dissipation, excellent mechanical strength and a larger light emission area that offers greater illumination and reduced glare. EVL series represents the LED alternative for all those areas in which it was usual to use lighting fixtures with discharge lamps of low and medium power more than 400W.
-
EVML Low Bay LED Lighting Fixture ATEX Zone 1
EVML lighting fixtures have been conceived to offer a Low Bay lighting fixture that could replace incandescent equivalents at lower costs. They are suitable for the illumination of small areas in which it’s necessary to limit the obstruction such as tunnels, passages, corridors, stairways, perimeter walls and command and control cabins (code EVML-50). The model with the side entry meets, at last, some specific installation needs, reducing the overall dimensions (code EVML-50L). They can also be used to illuminate and monitor hazardous materials contained inside tanks and cisterns thanks to a bracket for the coupling with the porthole flange (code EVML-50/O..).
-
EWL LED High Bay lighting fixture ATEX Zone 1
EWL series lighting fixtures has a body with fins designed in order to obtain the maximum heat dissipation, maintaining a low temperature class. In fact, it acts as a heat sink for the LED plate board not permitting the accumulation of dust but allowing a self-cleaning in case of rain or air movement. EWL lighting fixture has a light beam opening of 120°.
-
EXEL-L LED linear lighting fixtures
EXEL-L series increased safety lighting fixtures for Cortem LEDs resin-bonded strips are suitable to be installed in hazardous areas where a high degree of protection and resistance against corrosion is required. EXEL-L series is GRP made and features the ‘Ex de mb’ method of protection. It’s equipped with LED strips sealed in a transparent resin.
-
FLF-L, FLFE-L LED linear lighting fixtures
FLFE-…L (Ex de) and FLF-…L (Ex d) series lighting fixtures for LED tubes have two low copper content aluminium heads fitted with G13 lamp holder, a tempered borosilicate glass body that is resistant to changes in heat and a
white painted aluminium reflector. The ‘Ex de’ lighting fixture features an “Ex e” terminal board housing that allows entry to the lamp with a cable gland with an “Ex” seal (normal) as specified in installation standard (EN/IEC 60079.14). The entry to the ‘Ex d’ lighting fixtures must be through an Ex “barrier” cable gland (sealed) or, in the case of a conduit system, with an EYS, EZS series sealing fittings. -
FLOWEX High Bay LED lighting fixtures
e FlowEx explosion-proof LED lighting fixtures combine the constant lighting power of 151 l / W real with extreme lightness, ease of installation and versatility for any type of certified environment. The FlowEx series consists of three lamp body sizes and represents the LED alternative for all those areas where it was customary to install low and medium power discharge lamps up to 400W.
The finned body, patented with Heat Destroyer technology, is made of high-quality die-cast aluminum and acts as an excellent heat sink for the circular crown-shaped LED plate. The central heat sink element allows the fresh outside air to disperse the heat by lapping the surfaces in an ascending movement of air that takes advantage of natural convection. -
LIFEX-P LED linear lighting fixtures
The LifEx-P series lighting fixtures are characterised by an impact- (IK09) and UV-resistant fibreglass reinforced anti-static polyester resin and polycarbonate with a transparent part for light transmission. Versions with emergency operation can be accessorized with battery boxes to facilitate maintenance and/or battery replacement, or with special batteries for applications with ambient temperatures down to -60° C.
1
2
